SATM Selected Area Transfer Mode
Whether only selected areas are transmitted.
CSI 17 h
- ECMA-48
- §7.2.14 SATM – Selected Area Transfer Mode, p. 24
- DEC STD 070
- §5.10.1.3 Modes That Cannot Be Changed, p. 5-134
Mode 17 decides whether a transmission of the screen sends only the selected areas, or every character position regardless of them.
| State | ECMA-48 calls it | Meaning |
|---|---|---|
Reset, CSI 17 l | SELECT | only the selected areas |
Set, CSI 17 h | ALL | every character position |
DEC STD 070 §5.10.1.3, p. 5-134 lists it among the X3.64 modes a DEC terminal may treat as fixed, as not applicable. The VT510 manual’s table of modes for DECRPM marks it as always reset.
xterm ignores CSI 17 h and CSI 17 l (ansi_modes handles only modes 2, 4, 12 and 20), and DECRQM reports the mode as permanently reset, 4 (do_ansi_rqm). libghostty-vt ignores it too, but does not recognize the number, so it answers DECRQM with 0. Both DECRQM cases are known differences.
Validation
SATM-1: Reported as permanently reset
\e[17$p
|_____|
reply \e[17;4$y
SATM-2: Even after it is set
\e[17h
\e[17$p
|_____|
reply \e[17;4$y